Advanced Oxidation, Industrial Wastewater Treatment, Sewage Trentmemt Plant

• Customization: Available
• After-sales Service: Provide Technical Support Throughout The Process
• Warranty: <10year
• Model NO.: LAT-01
• Certification: ISO9001, CE
• Application: Industry
• Voltage: 380V
• Disinfection Method: Ozone
• Dielectric Material: Glass Tube
• Cooling Method: Water-Cooling
• Gas: Oxygen
• Frequency: 400-1000Hz
• Type: Electrolytic Type
• Ozone Capacity: 10kg/H
• Transport Package: Wooden Packaging
• Specification: 3400*1000*2200mm
• Trademark: LONGANTAI
• Origin: Weifang, Shandong, China
• HS Code: 8543709990
• Production Capacity: 20000

Product Description

Industrial wastewater pretreatment

The chemical park sewage treatment plant receives production wastewater from various upstream chemical companies. The water quality is complex and the wastewater has high chromaticity. It has poor biodegradability and is difficult to biodegrade. Moreover, it is all wastewater from upstream chemical companies after primary pretreatment and secondary biochemical treatment. Most of the discharged wastewater contains stubborn pollutants that are difficult to biodegrade, which increases the difficulty of biodegradation. The water quality is diverse, which has a strong impact on the sewage treatment plant treatment system. The capacity of the sewage plant's biochemical treatment unit is limited, and it is difficult to meet the emission standards by biological treatment alone.

 

Process dvantages

Pretreatment: Pretreatment reduces pollution concentration, balances water quality, opens and breaks chains, removes toxicity, and improves the biodegradability of wastewater, so that biochemical energy can operate better.

Biochemical treatment system: The pretreatment system reduces the operating load of the biochemical treatment system, saves energy efficiently, and accurately controls the treatment effect and operating costs of each unit.

Deep treatment: The final drainage is deeply oxidized through applicable catalytic oxidation technology to meet the national emission standards.

1. High Efficiency
a. High-efficiency discharge tube
Micro-gap double-layer discharge
HMS Patented design hexagon conductive plate

2.Ozone catalytic oxidation reactor

The ozone catalytic oxidation reactor is mainly composed of the reactor main shell, proprietary tower components and proprietary ozone catalyst filler. The proprietary tower components achieve efficient mixing of ozone gas and wastewater, combined with the patented ozone catalyst series products developed by our company, to improve the utilization rate of ozone.

3. Electrocatalytic Advanced Oxidation 

BDD electrodes can effectively degrade pollutants in various types of organic wastewater, such as organic wastewater from pharmaceutical/pesticide chemicals, petrochemicals, coking, smelting, printing and dyeing, papermaking, leather making, explosives, wine making, and landfill leachate.

(1) Phenols and their derivatives, such as phenol, mainly come from petrochemical companies;
(2) Pharmaceutical intermediates, such as 17β-estradiol, mainly come from pharmaceutical chemical companies;
(3) Dyes and pigments, such as methyl orange, mainly come from printing and dyeing factories;
(4) Herbicides and pesticides, such as chlorsulfuron, mainly come from pesticide manufacturers;
(5) Surfactants, such as car wash wastewater.

 

4. Fenton Advanced Oxidation

By adopting this reactor system, most of the Fe3+ produced by the Fenton process is attached to the surface of the Fenton carrier in the fluidized bed in the form of crystals. The crystallized Fe3+ iron salt forms a synergistic effect with the Fenton system and is converted into Fe2+ over and over again. This can greatly reduce the amount of chemical sludge produced by the dosage of the traditional Fenton process, reduce the amount of H2O2 added by more than 20%, the amount of Fe2+ added by more than 50%, and the amount of sludge by more than 40%, effectively increasing the COD removal rate by more than 10%, and saving 30% to 50% of the treatment and operation costs.

Our Advantages

10,000 square meters of water treatment filler production workshop
20,000 square meters of high-end environmental protection equipment production workshop
4000 square meters large open laboratory
More than 30 productive experimental bases
More than 40 pilot systems
More than 50 small pilot test devices
More than 60 large instruments and equipment
More than 50 petents 
More than 18 years of experience
Top 5 position of environmental protection technology industry in China.

Core Technology

 

Detailed Photos

   

Company Profile

Some case studies

1. Chemical/pharmaceutical/industrial park comprehensive wastewater pretreatment and upgrading

2. Coal chemical wastewater treatment
 

3. Petrochemical energy wastewater treatment
 

4.  Dye/pigment wastewater treatment

5.  Pesticide wastewater treatment

FAQ

1.Q: Where is your company? How can I visit there?

   A:The company is located in CaiFu International, Kuiwen District, Weifang City, Shandong Province, China. It is about an hour's drive from Qingdao Airport and Weifang Railway Station. If you need it, we can come and pick you up. Welcome to visit our company.
 

2.Q:Do you have minimum order quantity request?  
   A:No minimum order, but it can get a discount if you order a large quantity.

3.Q:Do you have certificates?
   A:Yes,we have ISO,SGS certificate.

4.Q:Can you meet my special requirements for the product?
   A:Yes,we have a professional design team.We can provide drawings according to your requirements.

5.Q:How to buy your idea products?
   A:You can provide us your water or waste sources,water or waste quality,flow rate and ground area (connect us for more details) 

6.Q:How to pay?
   A:T/T and L/C are acceptable and T/T will be more appreciated 30% deposit before producing,70% balance before loading by T/T.

7.Q:What is the delivery time ?
A: It depends on order quantities .Generally speaking ,the delivery time will be within 2 to 4 weeks.

8.Q:How to pack the products?
  A:We use standard package .If you have special package requirements ,we will pack as required ,but the fees will be paid by customers.

9.Q:How to install after the equipment arriving destination?
   A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee ,air tickets ,accommodation, wages will be paid by buyers.